Join Date: Jan 2008
Location: Ft. Wayne, Indiana
Look at the trim around the transmission shift gate. On the lower edge it should read QuadraTrac I, QuadraTrac II or QuadraDrive II. For the latter two, there will also be a "T" shaped, chrome lever to the right of the shift gate for shifting into low gear. If you have a 4x2, the area next to the shift gate will be a narrow and shallow open bin about the size of a large cell phone. Also, check if you have the Trail Rated badge on the driver's side. Some models came with a 4x4 badge on the rear deck lid.
I'm not sure where you are getting your information from, but only QDII will have the chrome script by the shifter. There is no chrome script by the shifter for either QTI, or QTII. All Commanders that are 4X4 will be full time 4X4. A 3.7 V6 can have QTI, which has the NV140 single-speed transfer case; thus no low gear and no T-handle by the shifter. The 4.7 V8 and the 5.7 V8 (if 4X4) both come standard with the NV245 2-speed transfer case, which incorporates the T-handle by the shifter to shift between high and low, as well as neutral. The clutch pak in the transfer case allows 100% of the available torque to be shifted between the axles. Normal torque split is 48/52. QDII is optional on the 4.7V8 and 5.7V8. QDII also incorporates the NV245 transfer case and adds front and rear Electronic Limited-Slip Differentials (ELSD). As mentioned above, QDII is indicated by the chrome script behind the shifter. The ELSD's allow 100% of the availabe torque to be shifted to any one wheel.
SOLD: 2006 Commander 4x4, Bright Silver Metallic with Medium Slate Gray, CPP 28U, VES, TTG IV, QDII, 4.7L, Rear AC, UConnect, Hulk Wheels
MODIFICATIONS: P255/65R17 Wrangler SA, Chrome Tow Hooks, 4.7L Badge, Black Grill w/Mopar Grill Guard, All LTD Chrome, LTD Exterior App Pkg, Mopar Molded Mud & Taillamp Guards, Woodview English Burlwood Molded Dash, Dk Slate Gray Leather Console Lid and E-brake Handle, Kicker/Infinity, NAVUS, Bilstein Shocks, aFe cai, Nokya HyperYellow Fogs, Rear Fogs