Jeep Commander Forum banner

cv shafts maybe?????

2K views 4 replies 3 participants last post by  H311B0Y 
#1 ·
i'm getting a ticking/clicking (only 3 or 4 times) when i accelerate from a dead stop and sometimes when i'm braking hard. It doesn't get worse when i turn, and everything it tight (i've checked EVERY bolt) so i'm thinking inner cv joint maybe?
 
#4 ·
i have a whine from the rear which has been there for over a year, but the click it from the front, and only 3-4 clicks and nothing when turning, so thats why i think it might be the inner cv joint. i also get a little bit of a clunk when i'm rolling and hit the gas from the front. and no its not the axle bushings i've replaced them 2x already in the last year.
 
#5 ·
ive seen this on cars sometimes while replacing a wheel bearing or an axle,if you dont put some never seize or grease on the splinx you can hear a noise similar to what you describe.might be worth checking
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top