Jeep Commander Forum banner

I made a boo boo

2K views 2 replies 3 participants last post by  cico7 
#1 ·
This afternoon I decided to tackle my project of fixing my broken horn issue. A while back the horn just randomly went off without stopping. I've had the horn relay unplugged since them. I took the cover to the steering wheel off and found that one of the wires for the horn had the shielding worn through and was making contact. I taped it up and put all the connectors back in place. Now, I have the airbag light glowing on the dash. Any idea on what it could be?

Thanks,

Ben
 
#3 ·
Did you do anything to the airbag working on it?
Check your plugs under the seats make sure they didn't come loose.
I read another post about a fuse nder the dash was bad and when replaced the
Light went off. I had a problem with a fuse and the anti skid light came on.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top