Sorry I'm not sure where I should post this question..
I know this may soud stupid but I have to change the battery in my 08 key fob and I just can't do it! I looked in the manuel and it just says to take off the back cover and change the battery... but I can't! It seems as if the battery is just supposed to slide out but it's not...Is there any special way to do it? It just seems as if my battery just doesn't want to come out and I don't want to force anything or break the key fob.
I've never changed my battery but I just took mine apart to see how hard it is to change. Had no problem. Just take the whole circuit board out. Be careful not to damage anything on the board.
__________________
2006 Steel Blue 5.7L HEMI Limited 4x4 Build Date: June 9, 2006 Hour 14
Interior: Dark Slate/Light Graystone with Saddle Brown Leather Seats
Quadra-Drive II, NAV, DVD, Trailer Tow Group IV, Off-Road Group II, Remote Start, UConnect, Rear Backup
Camera, Chrome Wheels, Magnaflow cat-back exhaust, Daytime Running Lights enabled
How do you open up the key fob to take the board out? There are no screws or any place to put a screw driver.
Mine has a small screw. I have an '06. What year is yours ?
__________________
2006 Steel Blue 5.7L HEMI Limited 4x4 Build Date: June 9, 2006 Hour 14
Interior: Dark Slate/Light Graystone with Saddle Brown Leather Seats
Quadra-Drive II, NAV, DVD, Trailer Tow Group IV, Off-Road Group II, Remote Start, UConnect, Rear Backup
Camera, Chrome Wheels, Magnaflow cat-back exhaust, Daytime Running Lights enabled
I also have the 06 and have a small screw on the backside. Is there a slot on the side where the front and back cover meet. If there is one, try putting a flathead screwdriver in there and turn the screwdriver trying to separate the two peaces.
__________________ 2006 Silver Jeep Commander Limited 4X4 - 5.7L Hemi, Quadra Drive II, Navigation System, Chrome Fuel Door, Sunroof, Rusty's 2" Lift Kit, Moto Metal M0950 Rims, Goodyear Silent Armor 255/70/17, Front Skid Plate, 4XGuard Belly Skid Plate, RR Supersliders, Chrome Front Tow Hooks, AEM Brute Force Intake, and WeatherTech Floorliners. See Pics here Semper Fi
On my '08 fob, there are no screws anywhere and no place where you can put a flathead screw driver to open it up. The only thing you can do as far as I can see is open up the back cover to expose the battery. My problem is that the battery doesn't want to come out.
Not really sure I have enough post to be able to show pictures, but it is definetly not soildred in.... It looks like it can come out but just doesn't want to.
Not really sure I have enough post to be able to show pictures, but it is definetly not soildred in.... It looks like it can come out but just doesn't want to.
You're way over the limit to post pics, so post 'em up !
__________________
2006 Steel Blue 5.7L HEMI Limited 4x4 Build Date: June 9, 2006 Hour 14
Interior: Dark Slate/Light Graystone with Saddle Brown Leather Seats
Quadra-Drive II, NAV, DVD, Trailer Tow Group IV, Off-Road Group II, Remote Start, UConnect, Rear Backup
Camera, Chrome Wheels, Magnaflow cat-back exhaust, Daytime Running Lights enabled
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.
Linear Mode
