I took a look at the manual to see if I can find what you were talking about, my manual is for a 2006 model. I don't know if it will be much help but here it goes.....
Well lets start with the first thing is the drivers seat, Light green / Violet stripe. I found a light green / violet tracer which shows from the motor-seat adjuster-driver recliner to the switch seat driver (assuming thats the switch on the side of the seat). So it's used to adjust the drivers seat recliner.
Now for the next one.
BLK - Looks to be your ground wire coming from the switch that was on the side of the seat. According to the diagram any time the switch would be moved it would provide a ground for your passenger recliner and horizontal adjuster motors, but that is only if it had heated seats. You should follow the wire back some and see if it splices into another color because it could also be a ground for a heated cushion.
Violet - I could not find anything with just violet, double check to see if there is a tracer, all the ones in the print are with a tracer.
I could not find anything listed in the manual for the light blue or green wires, I will keep looking. When I get a chance I will take a look at mine tomorrow and see if I can make a since of it.
2006 Jeep Commander Limited 4.7L QD II.....[I]4in Super lift Supension lift, Defender Roof Rack, 285 70R17 ProComp Xtreme Mud Terrain II tires, JK wheels, Rear grab handles, polished throttle body, RCV performance CV Axles, 4X Guard belly guard, front guard, jeepinbyals upper control arms, borla cat back exhaust and LED off road bar 40" and dully D2's.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.