will these wheels fit? i need help!! - Jeep Commander Forums: Jeep Commander Forum
Wheels / Tires This section contains discussion about wheels and tires for your Jeep Commander.

Reply
 
LinkBack Thread Tools Display Modes
post #1 of 20 (permalink) Old 10-07-2010, 03:26 PM Thread Starter
Junior Member
Points: 1,078, Level: 17 Points: 1,078, Level: 17 Points: 1,078, Level: 17
Level up: 78% Level up: 78% Level up: 78%
Activity: 0% Activity: 0% Activity: 0%
 
Join Date: Feb 2010
Posts: 15
will these wheels fit? i need help!!

So I've decided I want to put 24s on my commander. Now I know that I'm going to be hearing an earful from some of you but I've already decided. Now I know Nothing about the offset and spacing but after reading the sticky I'm a bit more knowledgeable. The rims I'm thinking about are the 2 crave no.4 or no.11 and the sizes are 24x10 with +18mm of offset. They would be on a 305/35 tire and I have an RC 2 inch lift with the spidertrax spacers. Can anyone give me an idea of what kind of sizes I'm going to need? Thank you.

-chris
cmmuse is offline  
Sponsored Links
Advertisement
 
post #2 of 20 (permalink) Old 10-07-2010, 03:47 PM
Moderator
Points: 10,821, Level: 68 Points: 10,821, Level: 68 Points: 10,821, Level: 68
Level up: 93% Level up: 93% Level up: 93%
Activity: 0% Activity: 0% Activity: 0%
 
SAL-XK's Avatar
 
Join Date: Apr 2010
Location: North Carolina
Posts: 1,993
Don't go any bigger then 32" over all size and you will be fine. The dimensions you gave have you at 32.41" over all height 305\35\24. So some slight rubbing at full lock you might have to cut or reshape some wheel wells but it shouldn't be to bad. I don't know what tire sizes are available but if you went from 35 to 30 you would drop to 31.2" making it a pretty easier fit.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Stop by and like the page

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
SAL-XK is offline  
post #3 of 20 (permalink) Old 10-07-2010, 03:47 PM
Senior Member
Points: 1,241, Level: 19 Points: 1,241, Level: 19 Points: 1,241, Level: 19
Level up: 41% Level up: 41% Level up: 41%
Activity: 0% Activity: 0% Activity: 0%
 
rx7gslse's Avatar
 
Join Date: Aug 2010
Location: Ft Worth, TX
Posts: 104
I'll leave the 24" part alone...


but with 10" wide wheels, I doubt that will clear anything easily... Most people have severe rubbing issues when going from 7.5" stock wheels to 9", and you're going all teh way to 10"

so no.. I say won't fit.

http://www.rimsntires.com/specs.jsp
Wheels: Wheel 1 Wheel 2
Wheel size 17x7.5 ET 47 24x10 ET 18
BackSpace 155 mm (6.1'') 157 mm (6.2'')
2 mm (0.1'') deeper.
Rim Lip 60 mm (2.4'') wider
Tires: Tire 1 Tire 2
Tire size 245/65-17 305/35-24
Section width 245 mm (9.6'') 305 mm (12'')
Sidewall 159 mm (6.3'') 107 mm (4.2'')
Tire diameter 750 mm (29.5'') 824 mm (32.4'')
74 mm (9.9%) taller.
*Seems TOO tall.
Rim sizes 17x6.5 to 17x9 24x9.5 to 24x11.5
Circumference 2355 mm (92.7'') 2587 mm (101.9'')
Revs per mile 683.4 622
Speedometer Assuming that this is OEM tire and speedometer readings are correct When speedometer reads 60mph (96.6km/h) actual speed will be 65.9mph (106.1km/h): 9.8% faster.
Clearance: Package 1 Package 2
Suspension Assuming that this is OEM wheel/tire and there is no any problems with clearance on both sides The same.
Fenders Package will stick out 59 mm (2.3'') farther. Make sure that you have enough room under the fender. If not, consider narrower tires or higher offset.
Wheelwells Will fill out the wheelwell by extra 37 mm. Make sure that you have enough room under the fender. If not, consider lower profiles or smaller rims.

Last edited by rx7gslse; 10-07-2010 at 03:53 PM.
rx7gslse is offline  
 
post #4 of 20 (permalink) Old 10-07-2010, 04:00 PM
Moderator
Points: 10,821, Level: 68 Points: 10,821, Level: 68 Points: 10,821, Level: 68
Level up: 93% Level up: 93% Level up: 93%
Activity: 0% Activity: 0% Activity: 0%
 
SAL-XK's Avatar
 
Join Date: Apr 2010
Location: North Carolina
Posts: 1,993
With the off set and the spacers the 10" wide tire should clear the knuckle but his tire will actually be 12.01" wide. I'm not doing the math on the off set but with 1.5" spacers plus his off set it should fit.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Stop by and like the page

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
SAL-XK is offline  
post #5 of 20 (permalink) Old 10-07-2010, 04:04 PM
Moderator
Points: 10,821, Level: 68 Points: 10,821, Level: 68 Points: 10,821, Level: 68
Level up: 93% Level up: 93% Level up: 93%
Activity: 0% Activity: 0% Activity: 0%
 
SAL-XK's Avatar
 
Join Date: Apr 2010
Location: North Carolina
Posts: 1,993
Quote:
Originally Posted by rx7gslse View Post
Fenders Package will stick out 59 mm (2.3'') farther
Ya thats what I was thinking this set up will stick out pretty far from the fender


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Stop by and like the page

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
SAL-XK is offline  
post #6 of 20 (permalink) Old 10-07-2010, 09:06 PM Thread Starter
Junior Member
Points: 1,078, Level: 17 Points: 1,078, Level: 17 Points: 1,078, Level: 17
Level up: 78% Level up: 78% Level up: 78%
Activity: 0% Activity: 0% Activity: 0%
 
Join Date: Feb 2010
Posts: 15
So then those wheels will fit? And how far will they stick out? I don't want it to look too bad like a pregnant rollerskate. (what my dad calls them)
cmmuse is offline  
post #7 of 20 (permalink) Old 10-07-2010, 09:28 PM
Member
Points: 996, Level: 16 Points: 996, Level: 16 Points: 996, Level: 16
Level up: 96% Level up: 96% Level up: 96%
Activity: 0% Activity: 0% Activity: 0%
 
lobo15_69's Avatar
 
Join Date: Jul 2010
Location: Colorado Springs
Posts: 51
wheels

I run 20x9 with a +25 offset have no rubbing and that is at stock height, I also have 17x9 on my WK with a 2" running 255/75/17's which is around a 32x11 if I'm remembering correctly, with the offset they stick out about an inch and a half and only rub on full lock, I see no reason why you would want to run spacers with 24's spending that much money on wheels make sure you get something that fits my research shows a 24x9 with a +35 offset would fit, you also need to consider where you want the wheels too sit with the 20x9 with +25 offset my wheels fit almost flush just inside the flares...for a real clean look...
lobo15_69 is offline  
post #8 of 20 (permalink) Old 10-07-2010, 10:02 PM
Senior Member
Points: 27,950, Level: 98 Points: 27,950, Level: 98 Points: 27,950, Level: 98
Level up: 60% Level up: 60% Level up: 60%
Activity: 0% Activity: 0% Activity: 0%
 
07JeepXK's Avatar
 
Join Date: Sep 2007
Location: Orchard Park, NY
Posts: 6,309
That wheel/tire package will NOT work. The tire size would be 32.4 x 12.00 on a 24x10 wheel. Without the spacers that wheel/tire package will already stick out 2.2 inches farther then stock. Thats really far out. Not only that, but the tire is taller then 32 inches and its 12 inches wide on a 10 inch wheel. You'll never pull that off. It just wont happen with a 2 inch lift, sorry.




2007 4.7 Liter XK | Front OME MD Springs w/Superlift Preload Spacer | Rear 4" Superlift Springs | Bilstein 5125 Rear Shocks | JBA UCA's | Rusty's Rear Adjustable Track Bar | Black Rock 997 Wheels | Fred Goeske 1/4 Inch Wheel Spacers | 305/70R17 Goodyear Wrangler MT/R w/Kevlar | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front E-Locker | Rear Heat/AC Delete
07JeepXK is offline  
post #9 of 20 (permalink) Old 10-07-2010, 10:12 PM
Senior Member
Points: 27,950, Level: 98 Points: 27,950, Level: 98 Points: 27,950, Level: 98
Level up: 60% Level up: 60% Level up: 60%
Activity: 0% Activity: 0% Activity: 0%
 
07JeepXK's Avatar
 
Join Date: Sep 2007
Location: Orchard Park, NY
Posts: 6,309
I have a 2 inch BDS spacer lift (and leveling spacer) on my XK with a set of 1.25 inch wheel spacers and 265/70R17 Goodyear MT/R's. Just to fit that I had to re mold the plastic inner fender well and bend over the pinch weld and from time to time I still have rubbing. Your talking about going with a package that will stick out approx. 3/4 of an inch more that has 12 inches wide of rubber. Not only that but those tires would be approx. 1/2 of an inch taller then my tires. It might fit in theory but you wouldnt be able to turn your steering wheel. Just my .02, if that package would clear it would still look ridiculous sitting out that far with a 24 inch wheel.




2007 4.7 Liter XK | Front OME MD Springs w/Superlift Preload Spacer | Rear 4" Superlift Springs | Bilstein 5125 Rear Shocks | JBA UCA's | Rusty's Rear Adjustable Track Bar | Black Rock 997 Wheels | Fred Goeske 1/4 Inch Wheel Spacers | 305/70R17 Goodyear Wrangler MT/R w/Kevlar | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front E-Locker | Rear Heat/AC Delete
07JeepXK is offline  
post #10 of 20 (permalink) Old 10-08-2010, 01:00 PM Thread Starter
Junior Member
Points: 1,078, Level: 17 Points: 1,078, Level: 17 Points: 1,078, Level: 17
Level up: 78% Level up: 78% Level up: 78%
Activity: 0% Activity: 0% Activity: 0%
 
Join Date: Feb 2010
Posts: 15
So what if I don't put the spacer on? Will it change a lot if I just have the 2 inch lift?
cmmuse is offline  
Sponsored Links
Advertisement
 
Reply

  Jeep Commander Forums: Jeep Commander Forum > Jeep Commander Discussion > Wheels / Tires

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Jeep Commander Forums: Jeep Commander Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in











Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome