Join Date: Jul 2008
Location: Northwest Central Jersey
Sounds like the drive shaft gets wacked out of alignment by the bump. This could be cause by some damage at the ends of the shaft or even where it telescopes in the middle. Crawl under there and give the drive shaft a good shake or even a kick. It should not move at all. If it moves it could be a U-joint is messed up or the couplings at the end. Also try to turn the drive shaft by hand both forward and back. Either way it should have no movement at all.
Bright Silver 4.7L 2.25 RR/OME lift, Kumho KL71 265/70/17, Flashpaq, Lights, rack, intake, Super44, mopar skids, 4x belly guard, rear fog lights, MM9500 winch, GetLost4x4 winch mount
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.