Jeep Commander Forum banner

My Commander lift OME and 5100

4K views 8 replies 5 participants last post by  Chelio12 
#1 · (Edited)
So I just completed my lift and I thought I would share my specs because there seems to be so many combos. Here is what I have

OME HD springs all 4
5100 Bilstein shocks
Front set on minimum lift
1 1/4" wheel spacers
Nitto Ridge Grappler C load 265/70/17---These tires are the most aggressive quiet good riding tires I could find that are excellent in the snow too
Pinch weld modification

Not installed are the JBA A Arms I am ordering because the camber is to far off

Forgot to mention 22" center of wheel to fender opening up front and 21" in the rear
 
#5 ·
Nice Job! Looks like the way it should have looked from the factory.
 
  • Like
Reactions: G_unitXK
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top