[Towerladder]

Hi All, Been lurking for a couple of years and have gotten some great info from you. But I just ran into an issue that I can't find any answers to.

I have a 2007 Jeep Commander with power drivers seat. Its on the way out. I bought a 2006 power drivers seat. Well... Different wiring harnesses. What am I to do? Do I need to purchase a whole new wiring harness? Can I cut out the harnesses and wire the wires directly? (I dont think that's possible because there are additional harnesses on the 06 that arent on the 07)

I'm lost, any suggestions?

 

[Towerladder]

07 Harness

06 Harness

 

[jeep5253]

Hi All, Been lurking for a couple of years and have gotten some great info from you. But I just ran into an issue that I can't find any answers to.

I have a 2007 Jeep Commander with power drivers seat. Its on the way out. I bought a 2006 power drivers seat. Well... Different wiring harnesses. What am I to do? Do I need to purchase a whole new wiring harness? Can I cut out the harnesses and wire the wires directly? (I dont think that's possible because there are additional harnesses on the 06 that arent on the 07)

I'm lost, any suggestions?

They are probably different because of the model differences and not because of the model year difference. What is the model of your XK and what is the model of the donor?

.

 

[Up4XK]

I think you are looking at the difference between heated seats and non-heated seat. Maybe also memory vs not.

 

[Towerladder]

Just an update, I mongoed all the needed items off of the donor unit and replaced the broken ones. Didn't want to have to mess with all the wiring. Thanks for all who responded.

 

[Big Blue]

Just an update, I mongoed all the needed items off of the donor unit and replaced the broken ones. Didn't want to have to mess with all the wiring. Thanks for all who responded.

Glad to hear you got it all sorted out @Towerladder.

 

[mamaminnesota]

I swapped out wiring harnesses today on passenger seat,anticipating having to do same tomorrow for drivers side. Already repairs and replaced all the door handles and rewired back passenger side door.been pulling parts every weekend to restore my 06 since son gave it back to me (apparently not good enough for him)

 

[rblapham]

@mamaminnesota
Welcome to the forum.

ATTENTION All Forum Members - Mandatory Requirement!

Please read this and fill in some of your details and make a signature with your Commander details. (year, model trim, engine, 4wd system, etc.) It is nice for us know what your Commander has in it so we can better help you.

To make or modify a Signature click here for instructions - Signature - How to make or modify

NEW MEMBER REQUIRED READING!!! Important New Member information, Forum requirements & Forum rules. | Jeep Commander Forum

To get the list of everything built into your Commander when built at the factory - have your VIN number (case sensitive) and go here Chrysler Build sheet - Equipment Listing Not necessarily for your signature but so you know what you have.

Also post an introduction in the "New Member" section. New Member Section

You can download a free Owner's Manual here--->Owner's Manual

 

[Stircrayzy]

@Towerladder and any others wondering... yellow is the key indicator of active restraints. Side impact airbags, and seatbelt pretensioners can be dysfunctional if not properly handled/connected. Also the passenger seat mount has Occupant weight sensors that affect the frontal impact airbag deployment. There is a specific procedure for reinstalling that seat, i just cant find what page in the service manual.
Yes there also can be heaters missing from the 06 connector, but thats not as concerning.