Jeep Commander Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Anyone install an amazon waverspeed 3 inch lift before?
Having trouble fitting strut with lift on top without removing axle shaft
 

·
Registered
Joined
·
3 Posts
Discussion Starter #2
Ok, I got it done!!
I had to remove the front hub and let the axel shaft hang.
Removed wheel well plastic and fender flair on the front left only. The right side went in without having to remove any plastic.
I assembled the new strut and spacer on the workbench with the strut fork and pinch bolt.
I hung the strut by the top nuts then compressed the spring to align the strut fork with the lower A-arm. Once on the rest is straight forward.
I’m ve
40955
ry happy with the end results
Im now on 265/70R17’s.
 

·
Premium Member
Joined
·
23 Posts
Ok, I got it done!!
I had to remove the front hub and let the axel shaft hang.
Removed wheel well plastic and fender flair on the front left only. The right side went in without having to remove any plastic.
I assembled the new strut and spacer on the workbench with the strut fork and pinch bolt.
I hung the strut by the top nuts then compressed the spring to align the strut fork with the lower A-arm. Once on the rest is straight forward.
I’m ve View attachment 40955 ry happy with the end results
Im now on 265/70R17’s.
Looks like it turned out well...good looking setup there.
 
1 - 8 of 8 Posts
Top