Jeep Commander Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
324 Posts
Discussion Starter #1
If you live in the Denver CO area, and are interested in the following please send me a PM. First come first serve.
Thanks


4X Guard
Side Guard HC

“It's nice looking, very functional, and really heavy duty ”

Replaces OEM "plastic" molding 8-inches of under-slider sliding surface

Welded, finished body-hugging endcaps Product extends 2.25-inches below door
• Replaces the OEM molded plastic rocker panel element and is designed to handle the rigors of hard-core rock crawling or trail riding.
• Design increases OEM ground clearance at the rocker panel by about 1 inch, blends with vehicle lines, and includes body-hugging end caps.
• Design provides an 8-inch wide, continuous sliding surface on its underside, as well as two notches, one front and one rear, for more secure vehicle lifting with a HiLift-type jack.
• Laser-cut 10 gauge steel, plus internally-welded 10 gauge "stiffners" (10 ga X 2) for longitudinal strength along vulnerable areas and 3 gussets for lateral strength. Each slider unit weighs over 40 pounds--they are massive and tuff.
• All materials are sand-blasted and powder-coated in textured semi-gloss black (unpainted version available).
• Product includes two one-piece slider units, two 52-inch mounting stiffners, and all mounting hardware (24 nuts/bolts and a nut-insert installation tool).
• Easy bolt-on installation involves 12 mounting bolts per side, 6 of which require minor drilling and installation of nut inserts.
 

·
Registered
Joined
·
2,473 Posts
Look nice, except I am not a fan of the laser cut 4xguard writing in it. I prefer products that don't need their name plastered on it -- if it's a good product I will advertise it by word of mouth.
 

·
Registered
Joined
·
437 Posts
I would like to see one on Commander.
I agree I am not a fan of the cut outs but not a deal breaker.
 

·
Registered
Joined
·
2,473 Posts
I'd like to see the ones for the Commander. Are they exactly the same.

Also are they triple coated (zinc, e, powder)? If they are and if they couldn't be bought without the silly writing on the side I would strongly consider them.
 

·
Registered
Joined
·
324 Posts
Discussion Starter #9
rubicontrail.net said:
I'd like to see the ones for the Commander. Are they exactly the same.

Also are they triple coated (zinc, e, powder)? If they are and if they couldn't be bought without the silly writing on the side I would strongly consider them.
They are powder coated matt black, or left unfinished so you can color match. I too would like to see one on a commander, so somene in the Denver area speak up, and we will work out getting this thing on your vehicle.

Uber, Thanks for the photos:)
 

·
Registered
Joined
·
437 Posts
I am sorry, I guess I didn't realize you were looking for someones Commander to build a prototype. Do you have a web site?
It seems the Commander has a lot wider piece of rocker trim than the Grand Cherokee so the guard for it will be alot heavier?
Do you have any photos of the Grand Cherokee guard in action? Say resting on a rock.
 

·
Registered
Joined
·
324 Posts
Discussion Starter #11
I'm not selling these, but I did contact 4X Guard about them and they need someone's ride to test fit. I am just looking to hook someone up!
 
1 - 11 of 11 Posts
Top