Jeep Commander Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
The radio in our 06 Commander stopped putting out sound; it looks like it works fine, but jsut no sound out of the speakers. We removed the radio and installed in in our friends 07 Commander and the radio worked normally, so the radio itself is fine. Would this mean the amp is bad? Is there a fuse for the amp? What else could cause the problem? Any help/insight would be welcomed!!
 

·
Administrator
Joined
·
16,153 Posts
Check the fuses.
 

·
Registered
Joined
·
954 Posts
Like Jeep5253 stated above- check the fuses, if the fuse is good then check the amp itself (located in the driver's side rear panel) for any signs of life. If you suspect amp is powered on then maybe check the lines going to and from the amp.

Also, use the search function in this forum, others have reported the same issue and might have posted a solution. Good luck! Keep us posted on what you find and welcome to the forum.
 
1 - 3 of 3 Posts
Top