Jeep Commander Forum banner
1 - 3 of 3 Posts

·
Registered
2010 Limited HEMI
Joined
·
76 Posts
Discussion Starter · #1 ·
Hello all, searched and searched and can't find anyone running them on the highest setting. Measuring from the ground to my wheel well, my rear sits exactly 2.5 inches taller than the front. Reason stands to me, I can run the highest setting, and merely be level. I'm told the highest setting with the extra weight of the hemi should be perfect, and the rear height can be left stock.

Can't find anyone whom has done this with a hemi however.

I don't have a spring compressor, so was going to do my rear shocks myself, and have a shop install my fronts and align it. If I can get away with not having them touch the rear, that's what I would like to do.

Judging by the instructions, 2 inches in the middle would leave me .5 low...

Suppose absolute worst case is I could borrow or rent a compressor for the rear after the fronts are on, and slip an extra isolator in, but would rather not.

2010 limited awd with a hemi. Thanks all.
 

Attachments

·
Registered
2010 Limited HEMI
Joined
·
76 Posts
Discussion Starter · #3 ·
Johnny, I added your Commander to your signature so our readers can see what you have and help you better.
Good morning and thank you. Been a while since I was active on here. Going on 240k miles now lol still ticking!!
 
1 - 3 of 3 Posts
Top