Things were difficult up front installing OME springs/struts. I figured the rear would be easy. Then the spring cup bolt snapped. I welded nuts on the stud with no luck. A stud extractor twisted the stud right off near flush.
I then filed the remnant flat and center punched it. Drilled it with a cordless drill with a cheap right angle attachment and small to larger diameter screw machine length drills finishing with the right size drill for the heli-coil tap.
![Automotive tire Tire Bumper Motor vehicle Automotive exterior]()
I then filed the remnant flat and center punched it. Drilled it with a cordless drill with a cheap right angle attachment and small to larger diameter screw machine length drills finishing with the right size drill for the heli-coil tap.
