Jeep Commander Forum banner

1 - 4 of 4 Posts

2 Posts
Discussion Starter #1
I have to pull the half shaft from a 08 Commander. As seems to be pretty common the Clevis bolt is seized in the LCA bushing.

I am trying to confirm the part number of the bushing.

RockAuto lists the following:

MOOG K200183 - Front Lower Arm To Strut
ACDELCO 45G9384 - Front Lower Arm To Strut

Can anyone confirm if one of these would be the correct bushing?


6,446 Posts
Glad to hear it @harryhood & welcome to the forum; Post some pics of your XK when you can;

Here are some links if you need to order any more parts for repairs or upgrades to your XK;

Chrysler/Jeep Factory Parts:

North American Parts: https://northamericanparts.rpmware.c...unt/login.aspx

JeepinByAl: -

Rough County lift kits - Suspension Lift Kits, Body Lifts, Leveling Kit, 4x4, Jeep, Chevy, Dodge, Ford, Off-road Truck | Rough Country Suspension Systems®

4 inch XK Superlift; Superlift Suspension Lift Kit

AFE: Advanced FLOW Engineering | Engineered Adrenaline -

Bilstein shocks & struts - Home

WAM Custom Bumpers -

Jeep Steel Bumpers - Truck Parts & Jeep Parts - Lift Kits, Winches, Tonneau Covers, Tires, Wheels, Bumpers, Performance ? 4 Wheel Parts

RockAuto -

Also, please read the new member required reading below if you haven't done so already; lots of good information in here;

REQUIRED READING!!! New Member Introduction post & other important new member info.

Thanks & welcome aboard.

212 Posts
Those look like the right parts to me. I'd suggest going with the Moog part- they make good stuff. I've heard this bushing is a PITA to replace, so good luck! I just replaced the whole lower control arm, lol.

You'll also need the bolt that goes there....if it's seized, you'll end up having to cut it off:
Bolt: MOPAR 6503047 Hex Flange Head M16x2.00x135
Nut: MOPAR 6102252AA Hex Flange Lock M16x2.00
1 - 4 of 4 Posts