I was just on nationaldrivetrain.com and found Motive Gear Ring & Pinion for a Chrysler 8.25 10 bolt 29 spline rear end. Id assume those would work. But good luck on the front end. Im not even sure what axle that is up there.
I am kind of gauge nerd. I love them and the information they send to you. I have a 2007 jeep commander limited with a HEMI and I would like to either add a mechanical oil pressure gauge or a electric oil pressure gauge. I am wondering if anybody has done this and what kind and the location...
Last summer I ordered some King struts for a Jeep Grand Cherokee and installed them on my commander. they were about $1.500 for the pair. Mounting the reservoir ended up being a challenge, I had to use steal threaded rivets and a galvanized fence hanger, but it worked. Some pics of that as well.
Hey guys! Rebuilding my engine and I want your input on parts and upgrades!
Long story short, I dropped a valve seat in Cyl 5. It didn't break so the piston and cylinder are fine (yay!). The head is a little dinged where the seat bounced around on top of the valve during my attempts to figure...
I just ordered and auxiliary fuel tank for under $1.500, Yes it is expensive. Here is the links.