Jeep Commander Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
can anyone tell me whats the best power source , i installed the unit i just have to snake the wires.... much appreciated....thank you.. this is not a factory model..
 

·
Registered
Joined
·
809 Posts
The battery.









OK, real answer. Snake the wires down the C-pillar (be sure to go over/behind the airbags) and along the door sill up to the driver's footwell. Meanwhile, pull a power lead from the battery and a ground from the chassis; route wires through the main rubber grommet in the firewall and meet your first cables in the footwell. Integrate a relay. Run your A/V cables up behind the spedo and to the headunit. Along this same route run a wire to tap into the left cig. lighter socket- this is your trigger for the relay. Double check all your connections, then enjoy a reliable power source when the car is on, and automatic power-down when you remove the key.
http://www.jeepcommander.com/forums/showthread.php?t=10582&page=3
 
1 - 2 of 2 Posts
Top