Jeep Commander Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter #1
Can anyone tell me how to change the bulbs on a 06. I have tried reaching down from the top opening and looked through the hole under the wheel arch and can just reach it .Does it mean taking out the battery / airfilter?.Does the bulbholder come out by twisting or pulling to change the bulb or is there another way?
 

·
Registered
Joined
·
809 Posts
Just reach through the access panel in the wheel-well and rotate the bulb assembly +-90 degrees and pull. Then pop the old bulb out and the new bulb in. It's simple, but sometimes takes strong fingers.
 

·
Premium Member
Joined
·
927 Posts
lay under the front corner, and reach up between the wheel arch and the front bumper....its a pain in the backside location, but as I found it took only a couple of mins to replace both bulbs by twisting the bulb holder anti clockwise, drop down, remove and replace!
 
1 - 4 of 4 Posts
Top