Jeep Commander Forum banner

1 - 6 of 6 Posts

·
Banned
Joined
·
10 Posts
Discussion Starter #1
Need help finding the push nut / speed nut for the screw behind the interior pull handle. Here is a pic of the drivers side

Thanks


Sent from my iPhone using Tapatalk
 

·
Premium Member
Joined
·
677 Posts
NAPA and probably a lot of other auto parts stores carry trim fasteners, if you can take a sample with you it would help. There is also Fastenal? Or try a body shop or the dealer.
 

·
Registered
Joined
·
359 Posts
I'm not seeing it on mopar's official parts website, but I also know they don't have part numbers for things like zip-clip ties for wiring harnesses, this may be a similar case. However, That's a good picture, if you take that to the parts department of any mopar dealership, they'll be able to find the part for you, and it likely won't be costly. I've ordered tons of bolts through them and most were really cheap.
 

·
Banned
Joined
·
10 Posts
Discussion Starter #4
I found it in one of the diagrams. It's discontinued now. 68019550AA
No dealer had it in my state, but there was one in Lynchburg VA. Was 5 bucks but ended up having to pay 14 for shipping. These guys are thieves.


Sent from my iPhone using Tapatalk
 

·
Banned
Joined
·
10 Posts
Discussion Starter #5
Guess I should be just as mad at the hack that buggered up the door in the first place. Guy put the wrong plastic clips in it too. Which failed. He put the screw in the edge near the latch. If someone can't put it back, they shouldn't be taking it apart. Hope the previous owner didn't have to pay much.


Sent from my iPhone using Tapatalk
 

·
Premium Member
Joined
·
294 Posts
Clip nut

If you Google that number it shows about 5 different spots that say they have them they are all around 5.00 I didn't check shipping but they are out there


Swanny
 
1 - 6 of 6 Posts
Top