Jeep Commander Forum banner
61 - 77 of 77 Posts

·
Registered
2006 Jeep Commander Limited 4.7 V8
Joined
·
2 Posts
NEW MEMBER REQUIRED READING!!! Important New Member information, Forum requirements & Forum rules.

Hello new members. Please allow me to welcome you to jeepcommander.com; We want you to enjoy your time here, share your experiences and hopefully learn more about your Jeep Commander by reading the valuable information that is provided and shared here among our members;

Now, that being said, we need to ensure you, as new members, take the following steps to adhere to the forum rules & guidelines that have been put in place;

First & foremost; You're expected to acknowledge & respond to all communications that are sent to you, by a Forum Moderator or Forum Administrator in a timely manner; This includes direct messages/conversations on your profile page, e-mails & posts in any thread, where a Moderator or Administrator addresses you directly.

Failure to do so will adversely affect your forum membership, up to & including the possibility of being banned from the forum, for violation of forum rules.

Each member is allowed one user profile and one user profile only; Any member caught creating multiple user profiles, will immediately be permanently banned from the forum.

Profile User Names
; Please use some common sense & discretion while registering & choosing a user name. This is a public forum; Anyone who selects a username that could be construed as inappropriate, or, offensive to others by Forum Moderators/Administrators, will be banned from the forum without warning.

So again, please exercise sound judgement & good morale character, when creating your user name.

If you are a new member and registering to create your user profile - YOU SHOULD TRY TO LOG-IN FROM A DESKTOP OR LAPTOP COMPUTER WHENEVER POSSIBLE. IT IS DIFFICULT TO VIEW ALL OF THE USER REGISTRATION FIELDS IF YOU ARE LOGGED IN ON A SMART PHONE USING THE MOBILE VIEW APP.

YOU MUST create a profile signature, displaying all of your Commander's information; This is a mandatory requirement for ALL FORUM MEMBERS - Failure to comply will result in progressive disciplinary action, up to & including the possibility of being banned from the forum, for violation of forum rules.

Once logged-into the forum - with the forum home page displayed, Click on your avatar, which is displayed at the top right-hand corner of your screen;

At the bottom of the menu that is displayed, select Account Settings as shown in the image below;




Once in Account Settings, select the 'Signature' tab (as shown below) where you will add your Commanders applicable information.



If you don't own a Commander just put " I don't currently own a Commander" as your signature and no further action is required.

If you do own a Commander, please create a text signature like the one underlined in blue, in the image above;

Your profile text signature should contain the following information at a minimum;

Model year;
Trim package; Sport/Base, Limited or Overland;
Power-train; 3.7L V-6; 4.7L V-8; 5.7L V-8 or 3.0L CRD
2WD or 4WD;
If 4WD - which 4WD system you have - QT-I, QT-II or QD-II;
Current Mileage
;

Once your signature has been completed, our community would certainly like to get to know you better, so, please take the time to post an introduction thread in the new member section.

This is our normal new member protocol
and a long time tradition, here in our Jeep Commander.com community.

PLEASE DO NOT post your 1st post/New Member Introduction thread, without completing your profile signature as directed here; If you do, you will be issued a forum warning. Failure to complete your profile signature as directed, will result in progressive discipline, up to & including, potentially, being banned from the forum for violation of forum rules.

The length of the ban will be determined by the Forum Moderators, based on the circumstances, as well as the member's response - or lack thereof.

PLEASE: Do not post your New Member introduction in another member's thread;

Your introduction post should be your own "New Member" thread, that you've created in the New Member sub-forum.



Please tell us your name (first name - or, even a nick-name is fine) & where you're from; Then you should follow up with other information like the year, trim package, color, power-train, and 4WD system (if it's a 4x4) of your Commander. You may also add whatever other relevant background information you would like to share.

UNTIL YOU REACH 5 POSTS - You will only be able to post in the New Member Section - but you can read any thread or post, in any sub-forum.

Once you hit 5 posts, your full user privileges will automatically kick-in and you will be able to post in the entire forum - including all of the sub-forums and you will also be able to post photos, URLs & hyperlinks.

When posting or uploading images - please don't upload or post anything larger than 1024 x 768 pixels because it bogs down the site and the image will take forever to load/open.

Since Photobucket started charging $400.00 a year for 3rd party image hosting a couple of years back, a lot of members have been asking for an alternative FREE 3rd party image hosting website - so here is a pretty good one:

Imgur

Our community is a wealth of information and we are always happy to help people in their quest to learn about the Commander they have just bought - or the Commander they are looking for.

For Anybody who is Looking to buy a Commander;

You can check to see if all of the factory recalls & campaigns have been completed for the Commander you're looking at (or for the Commander you have already bought) by clicking on the hyperlink below & plugging in the VIN; If you are still looking and have not bought your Commander yet, I strongly recommend you do this BEFORE you buy it;

Official Mopar Site | Service, Parts, Accessories & More

The difference between a safety recall and a campaign is this;

A safety recall pertains to a vehicle problem that is a safety concern; A campaign is a vehicle problem that is not a safety concern, but, pertains to customer satisfaction.

To get the factory build sheet for the Commander you are looking at, or, for the Commander you've already bought, enter your VIN here:

FCA RAM

The factory build sheet will list all of the factory options & optional preferred equipment packages that your vehicle had installed from the factory when it was built.

Additionally if you bought a Commander, and it didn't come with an owner's manual, you can download a .PDF owner's manual to save and/or print, from the website link below; Just click on "Jeep" then select the "Year" and "Model" of your Commander and click on "Select Vehicle"

Next, click on the "Owner's Manual" tab under "QUICK LINKS" then click on the "DOWNLOAD THE MANUAL (PDF)" button.

Official Mopar Site | Service, Parts, Accessories & More

NOTICE: These forum rules may be changed, or amended, without notice. It's every forum members responsibility, to check this thread regularly, for any updates or changes. By registering on JeepCommander.com, it's implied that you agree to these terms and all the other conditions of membership, as stated above.

This forum is a great place for general jeep knowledge, since many of our members have owned (or still own) other makes and models of Jeeps, so, ALL Jeep owners are welcome here.

I'd like to wish you a very warm welcome to JeepCommander.com and we hope you enjoy the forum.
Big Blue,
Thank you for the warm welcome and all the information. I will update my signature straight away.
Regards,
Don Hamblin
'06 Commander Limited, 4.7 V8. As yet unsure of transfer case and 4x4 system.
 

·
Administrator
Joined
·
8,296 Posts
Discussion Starter · #65 ·
Big Blue,
Thank you for the warm welcome and all the information. I will update my signature straight away.
Regards,
Don Hamblin
'06 Commander Limited, 4.7 V8. As yet unsure of transfer case and 4x4 system.
@nedco.16 ;

Welcome to the forum!!
 

·
Registered
Joined
·
4 Posts
Stupid question alert?

I think I have done all the required newb stuff but I still get the alert up top asking me to enter vehicle info so that people can answer questions more efficiently or whatever ...I click on the link it gives but it just takes me to my profile, which I thought I had already filled out properly... Any ideas?

Thanks
Thank you, I don't have a computer at my house so I will go to the library sometime this week and get it done.
Sincerely,
Ms. Karen
 

·
Administrator
Joined
·
8,296 Posts
Discussion Starter · #67 ·
Thank you, I don't have a computer at my house so I will go to the library sometime this week and get it done.
Sincerely,
Ms. Karen
No problem Karen;

I actually started on your profile signature for you, based on some information I saw in one of your posts;

If you want to save a trip to the library, just tell if your Commander is 2WD or 4WD & if it's 4WD, which 4WD system that you have;

Other than that I need your current mileage;

If you can post that information here, or, send it to me in a direct message, I'll add it for you & you'll be all set.
 

·
Administrator
Joined
·
8,296 Posts
Discussion Starter · #70 ·
Ok that was a lot to read I'm sure I'll have to go back a few times
@holtley9 ;

If you focus on the very first post of this thread, It will tell you everything you need to know;

It is a lot of information to digest;

That being said, it's designed to equip new members with the tools they need, to better understand their Commanders, as well as to get them critical documentation, that they may need, but don't have, when they show up here.
 

·
Registered
Commander, 2006, 4.7L 4WD. Stock and proud
Joined
·
4 Posts
Can
NEW MEMBER REQUIRED READING!!! Important New Member information, Forum requirements & Forum rules.

Hello new members. Please allow me to welcome you to jeepcommander.com; We want you to enjoy your time here, share your experiences and hopefully learn more about your Jeep Commander by reading the valuable information that is provided and shared here among our members;

Now, that being said, we need to ensure you, as new members, take the following steps to adhere to the forum rules & guidelines that have been put in place;

First & foremost; You're expected to acknowledge & respond to all communications that are sent to you, by a Forum Moderator or Forum Administrator in a timely manner; This includes direct messages/conversations on your profile page, e-mails & posts in any thread, where a Moderator or Administrator addresses you directly.

Failure to do so will adversely affect your forum membership, up to & including the possibility of being banned from the forum, for violation of forum rules.

Each member is allowed one user profile and one user profile only; Any member caught creating multiple user profiles, will immediately be permanently banned from the forum.

Profile User Names
; Please use some common sense & good judgement, while registering & choosing your user name. This is a public forum; Anyone who selects a username that could be construed as inappropriate, or, offensive to others by Forum Moderators/Administrators, will be banned from the forum without warning. This is & will remain, a zero-tolerance policy.

There is no cursing or swearing allowed to be posted; This is another zero-tolerance policy. Any member that posts profanity of any kind, will be immediately warned and repeat offenses will be handled with progressive discipline, up to being permanently banned from the forum, at the discretion of the forum Moderators & Administrators.

If you are a new member and registering to create your user profile - YOU SHOULD TRY TO LOG-IN FROM A DESKTOP OR LAPTOP COMPUTER WHENEVER POSSIBLE. IT IS DIFFICULT (BUT NOT IMPOSSIBLE) TO VIEW ALL OF THE USER REGISTRATION FIELDS IF YOU ARE LOGGED IN ON A SMART PHONE USING THE MOBILE VIEW APP.

YOU MUST create a profile signature, displaying all of your Commander's information; This is a mandatory requirement for ALL FORUM MEMBERS - Failure to comply will result in progressive disciplinary action, up to & including the possibility of being banned from the forum, for violation of forum rules.

Once logged-into the forum - with the forum home page displayed, Click on your avatar, which is displayed at the top right-hand corner of your screen;

At the bottom of the menu that is displayed, select Account Settings as shown in the image below;




Once in Account Settings, select the 'Signature' tab (as shown below) where you will add your Commanders applicable information.



If you don't own a Commander just put " I don't currently own a Commander" as your signature and no further action is required.

If you do own a Commander, please create a text signature like the one underlined in blue, in the image above;

Your profile text signature should contain the following information at a minimum;

Model year; 2006, 2007, 2008, 2009 or 2010
Trim package; Sport/Base, Limited or Overland;
Power-train; 3.7L V-6; 4.7L V-8; 5.7L V-8 or 3.0L CRD
2WD or 4WD;
If 4WD - which 4WD system you have - QT-I, QT-II or QD-II;
Current Mileage
;

The end result should be a signature, that appears at the bottom of all of your posts, that looks similar to this:

2007 Commander Sport; 4.7L V-8; QT-II 4WD; 146,000 Miles

Once your signature has been completed, our community would certainly like to get to know you better, so, please take the time to post an introduction thread in the new member section.

This is our normal new member protocol
and a long time tradition, here in our Jeep Commander.com community.

PLEASE DO NOT post your 1st post/New Member Introduction thread, without completing your profile signature as directed here; If you do, you will be issued a forum warning. Failure to complete your profile signature as directed, will result in progressive discipline, up to & including, potentially, being banned from the forum for violation of forum rules.

The length of the ban will be determined by the Forum Moderators, based on the circumstances, as well as the member's response - or lack thereof.

PLEASE: Do not post your New Member introduction in another member's thread;

Your introduction post should be your own "New Member" thread, that you've created in the New Member sub-forum.



Please tell us your name (first name - or, even a nick-name is fine) & where you're from; Then you should follow up with other information like the year, trim package, color, power-train, and 4WD system (if it's a 4x4) of your Commander. You may also add whatever other relevant background information you would like to share.

UNTIL YOU REACH 5 POSTS - You will only be able to post in the New Member Section - but you can read any thread or post, in any sub-forum.

Once you hit 5 posts, your full user privileges will automatically kick-in and you will be able to post in the entire forum - including all of the sub-forums and you will also be able to post photos, URLs & hyperlinks.

When posting or uploading images - please don't upload or post anything larger than 1024 x 768 pixels because it bogs down the site and the image will take forever to load/open.

Since Photobucket started charging $400.00 a year for 3rd party image hosting a couple of years back, a lot of members have been asking for an alternative FREE 3rd party image hosting website - so here is a pretty good one:

Imgur

Our community is a wealth of information and we are always happy to help people in their quest to learn about the Commander they have just bought - or the Commander they are looking for.

For Anybody who is Looking to buy a Commander;

You can check to see if all of the factory recalls & campaigns have been completed for the Commander you're looking at (or for the Commander you have already bought) by clicking on the hyperlink below & plugging in the VIN; If you are still looking and have not bought your Commander yet, I strongly recommend you do this BEFORE you buy it;

Official Mopar Site | Service, Parts, Accessories & More

The difference between a safety recall and a campaign is this;

A safety recall pertains to a vehicle problem that is a safety concern; A campaign is a vehicle problem that is not a safety concern, but, pertains to customer satisfaction.

To get the factory build sheet for the Commander you are looking at, or, for the Commander you've already bought, enter your VIN here:

FCA RAM

The factory build sheet will list all of the factory options & optional preferred equipment packages that your vehicle had installed from the factory when it was built.

Additionally if you bought a Commander, and it didn't come with an owner's manual, you can download a .PDF owner's manual to save and/or print, from the website link below; Just click on "Jeep" then select the "Year" and "Model" of your Commander and click on "Select Vehicle"

Next, click on the "Owner's Manual" tab under "QUICK LINKS" then click on the "DOWNLOAD THE MANUAL (PDF)" button.

Official Mopar Site | Service, Parts, Accessories & More

NOTICE: These forum rules may be changed, or amended, without notice. It's every forum members responsibility, to check this thread regularly, for any updates or changes. By registering on JeepCommander.com, it's implied that you agree to these terms and all the other conditions of membership, as stated above.

This forum is a great place for general jeep knowledge, since many of our members have owned (or still own) other makes and models of Jeeps, so, ALL Jeep owners are welcome here.

I'd like to wish you a very warm welcome to JeepCommander.com and we hope you enjoy the forum.
anyone tell me how to find the 4wd info, i tryed the build sheet with my VIN and the info was not shown....?
 

·
Registered
Commander, 2006, 4.7L 4WD. Stock and proud
Joined
·
4 Posts
NEW MEMBER REQUIRED READING!!! Important New Member information, Forum requirements & Forum rules.

Hello new members. Please allow me to welcome you to jeepcommander.com; We want you to enjoy your time here, share your experiences and hopefully learn more about your Jeep Commander by reading the valuable information that is provided and shared here among our members;

Now, that being said, we need to ensure you, as new members, take the following steps to adhere to the forum rules & guidelines that have been put in place;

First & foremost; You're expected to acknowledge & respond to all communications that are sent to you, by a Forum Moderator or Forum Administrator in a timely manner; This includes direct messages/conversations on your profile page, e-mails & posts in any thread, where a Moderator or Administrator addresses you directly.

Failure to do so will adversely affect your forum membership, up to & including the possibility of being banned from the forum, for violation of forum rules.

Each member is allowed one user profile and one user profile only; Any member caught creating multiple user profiles, will immediately be permanently banned from the forum.

Profile User Names
; Please use some common sense & good judgement, while registering & choosing your user name. This is a public forum; Anyone who selects a username that could be construed as inappropriate, or, offensive to others by Forum Moderators/Administrators, will be banned from the forum without warning. This is & will remain, a zero-tolerance policy.

There is no cursing or swearing allowed to be posted; This is another zero-tolerance policy. Any member that posts profanity of any kind, will be immediately warned and repeat offenses will be handled with progressive discipline, up to being permanently banned from the forum, at the discretion of the forum Moderators & Administrators.

If you are a new member and registering to create your user profile - YOU SHOULD TRY TO LOG-IN FROM A DESKTOP OR LAPTOP COMPUTER WHENEVER POSSIBLE. IT IS DIFFICULT (BUT NOT IMPOSSIBLE) TO VIEW ALL OF THE USER REGISTRATION FIELDS IF YOU ARE LOGGED IN ON A SMART PHONE USING THE MOBILE VIEW APP.

YOU MUST create a profile signature, displaying all of your Commander's information; This is a mandatory requirement for ALL FORUM MEMBERS - Failure to comply will result in progressive disciplinary action, up to & including the possibility of being banned from the forum, for violation of forum rules.

Once logged-into the forum - with the forum home page displayed, Click on your avatar, which is displayed at the top right-hand corner of your screen;

At the bottom of the menu that is displayed, select Account Settings as shown in the image below;




Once in Account Settings, select the 'Signature' tab (as shown below) where you will add your Commanders applicable information.



If you don't own a Commander just put " I don't currently own a Commander" as your signature and no further action is required.

If you do own a Commander, please create a text signature like the one underlined in blue, in the image above;

Your profile text signature should contain the following information at a minimum;

Model year; 2006, 2007, 2008, 2009 or 2010
Trim package; Sport/Base, Limited or Overland;
Power-train; 3.7L V-6; 4.7L V-8; 5.7L V-8 or 3.0L CRD
2WD or 4WD;
If 4WD - which 4WD system you have - QT-I, QT-II or QD-II;
Current Mileage
;

The end result should be a signature, that appears at the bottom of all of your posts, that looks similar to this:

2007 Commander Sport; 4.7L V-8; QT-II 4WD; 146,000 Miles

Once your signature has been completed, our community would certainly like to get to know you better, so, please take the time to post an introduction thread in the new member section.

This is our normal new member protocol
and a long time tradition, here in our Jeep Commander.com community.

PLEASE DO NOT post your 1st post/New Member Introduction thread, without completing your profile signature as directed here; If you do, you will be issued a forum warning. Failure to complete your profile signature as directed, will result in progressive discipline, up to & including, potentially, being banned from the forum for violation of forum rules.

The length of the ban will be determined by the Forum Moderators, based on the circumstances, as well as the member's response - or lack thereof.

PLEASE: Do not post your New Member introduction in another member's thread;

Your introduction post should be your own "New Member" thread, that you've created in the New Member sub-forum.



Please tell us your name (first name - or, even a nick-name is fine) & where you're from; Then you should follow up with other information like the year, trim package, color, power-train, and 4WD system (if it's a 4x4) of your Commander. You may also add whatever other relevant background information you would like to share.

UNTIL YOU REACH 5 POSTS - You will only be able to post in the New Member Section - but you can read any thread or post, in any sub-forum.

Once you hit 5 posts, your full user privileges will automatically kick-in and you will be able to post in the entire forum - including all of the sub-forums and you will also be able to post photos, URLs & hyperlinks.

When posting or uploading images - please don't upload or post anything larger than 1024 x 768 pixels because it bogs down the site and the image will take forever to load/open.

Since Photobucket started charging $400.00 a year for 3rd party image hosting a couple of years back, a lot of members have been asking for an alternative FREE 3rd party image hosting website - so here is a pretty good one:

Imgur

Our community is a wealth of information and we are always happy to help people in their quest to learn about the Commander they have just bought - or the Commander they are looking for.

For Anybody who is Looking to buy a Commander;

You can check to see if all of the factory recalls & campaigns have been completed for the Commander you're looking at (or for the Commander you have already bought) by clicking on the hyperlink below & plugging in the VIN; If you are still looking and have not bought your Commander yet, I strongly recommend you do this BEFORE you buy it;

Official Mopar Site | Service, Parts, Accessories & More

The difference between a safety recall and a campaign is this;

A safety recall pertains to a vehicle problem that is a safety concern; A campaign is a vehicle problem that is not a safety concern, but, pertains to customer satisfaction.

To get the factory build sheet for the Commander you are looking at, or, for the Commander you've already bought, enter your VIN here:

FCA RAM

The factory build sheet will list all of the factory options & optional preferred equipment packages that your vehicle had installed from the factory when it was built.

Additionally if you bought a Commander, and it didn't come with an owner's manual, you can download a .PDF owner's manual to save and/or print, from the website link below; Just click on "Jeep" then select the "Year" and "Model" of your Commander and click on "Select Vehicle"

Next, click on the "Owner's Manual" tab under "QUICK LINKS" then click on the "DOWNLOAD THE MANUAL (PDF)" button.

Official Mopar Site | Service, Parts, Accessories & More

NOTICE: These forum rules may be changed, or amended, without notice. It's every forum members responsibility, to check this thread regularly, for any updates or changes. By registering on JeepCommander.com, it's implied that you agree to these terms and all the other conditions of membership, as stated above.

This forum is a great place for general jeep knowledge, since many of our members have owned (or still own) other makes and models of Jeeps, so, ALL Jeep owners are welcome here.

I'd like to wish you a very warm welcome to JeepCommander.com and we hope you enjoy the forum.
Recieved, and I learned a thing or three about my XK I didn't know today. ; )
 

·
Super Moderator
2006 Commander Limited, 5.7 Hemi QD2
Joined
·
2,008 Posts
The 4 wheel drive type should be listed as 2 Wheel drive or Quadra- Track I or Quadra-Track II or Quadra-Drive II. The one listed closest to the end will be what you have if it was an upgraded build.
 
61 - 77 of 77 Posts
Top