Jeep Commander Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I have seen several threads here about taking out the third row seating in the Commander, but does anyone have info on installing the third row in a sport that came with the option deleted? I pulled my floor cover up and noticed that the mounting points are there, but just wondering if anyone had suggestions for the best way to install then finish the floor after putting one in.
 

·
Premium Member
Joined
·
691 Posts
I have no idea about the floor. I do know they lock in the upright position. So you will need new rear side panels and lock/release assembly.
 

·
Registered
Joined
·
417 Posts
I have no idea about the floor. I do know they lock in the upright position. So you will need new rear side panels and lock/release assembly.
The importance of this is compounded by the fact that the seat belts are anchored to the seats.

I did this with my Tahoe and all of the threaded holes were there on the floor. They were just covered by some body colored rubber tape.
 
1 - 3 of 3 Posts
Top