Jeep Commander Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hey everyone!!! Im a new Jeep owner. I have a 09 Commander and I'm getting no power what so ever to my liftgate. No plate lights, no lights bar at the top of the gate and nothing from my backup camera. I've checked the lift gate fuse and it is fine. Any suggestions?
 

·
Super Moderator
Joined
·
5,763 Posts
Hey everyone!!! Im a new Jeep owner. I have a 09 Commander and I'm getting no power what so ever to my liftgate. No plate lights, no lights bar at the top of the gate and nothing from my backup camera. I've checked the lift gate fuse and it is fine. Any suggestions?
Welcome to the forum @shep26415;

Sounds like you have a blown fuse or a ground somewhere; this thread should help you narrow down what to check and where to look;

https://www.jeepcommander.com/forums/10-electronics-nav-discussion/55657-junction-block-explained.html
 

·
Super Moderator
Joined
·
5,763 Posts
1 - 4 of 4 Posts
Top