Have you checked with your local dealer?
Lower control Arm Bolt
Hello all! Does anyone know where I can a replacement bolt for the front lower control arm that connects to the front of the vehicle? Mine is currently seize, as well as my c/v axle lol. I would like to get a replacement bolt so I could either chop off the one that I have or at least replace the old one with my new control arm. Any help would be great, thank you!
1 - 11 of 11 Posts
No I have not, local dealers tend to be unreliable by me. I was mainly looking for a part number, i stumbled upon one part number that I feel like may work after referencing the mopar parts website, the part number is 6503047. The actual bolt is not listed in the parts reference under the diagram, however the description shows "M16x2.00x135. LCA To Frame. Pervious Clevis, now Standard Bolt." Which almost sounds correct however, I want to be sure before I buy a $30 bolt because I will need two of them. I will perhaps call the dealer monday to confirm the part number. Any additional confirmation before I call would be highly appreciated.
Bump
@RaptorPatrol You might have to get it from a salvage yard.Hello all! Does anyone know where I can a replacement bolt for the front lower control arm that connects to the front of the vehicle? Mine is currently seize, as well as my c/v axle lol. I would like to get a replacement bolt so I could either chop off the one that I have or at least replace the old one with my new control arm. Any help would be great, thank you!
You can check the online mopar parts houses. GTS!
www.moparpartsgiant.com
www.factorymopardirect.com
Genuine OEM Mopar Parts and Accessories Online - Mopar Parts Giant
MoparPartsGiant.com is a trusted online store for Genuine OEM Mopar Parts and accessories. We offer fast shipping and wholesale prices. Superb customer service and online inventory make us the #1.
www.moparpartsgiant.com
OEM MOPAR Parts - 35% off MSRP | Factory MOPAR Direct
Get A Great Deal On Genuine MOPAR Replacement Parts And Accessories. We Sell Quality OEM Replacement Parts For CDJR Vehicles At Wholesale Prices!
www.factorymopardirect.com
Try Fastenal for the bolt my man an as far as the axle seized up in the carrier, Get some Blaster an spray it up in there an let it soak an keep working it back an forth I had my front end on a work bench it made things much easier an a slide hammer really helpsHello all! Does anyone know where I can a replacement bolt for the front lower control arm that connects to the front of the vehicle? Mine is currently seize, as well as my c/v axle lol. I would like to get a replacement bolt so I could either chop off the one that I have or at least replace the old one with my new control arm. Any help would be great, thank you!
@calvikrue
Welcome to the forum.
ATTENTION All Forum Members - Mandatory Requirement!
Please read this and fill in some of your details and make a signature with your Commander details. (year, model trim, engine, 4wd system, etc.) It is nice for us know what your Commander has in it so we can better help you.
To make or modify a Signature click here for instructions - Signature - How to make or modify
NEW MEMBER REQUIRED READING!!! Important New Member information, Forum requirements & Forum rules. | Jeep Commander Forum
To get the list of everything built into your Commander when built at the factory - have your VIN number (case sensitive) and go here Chrysler Build sheet - Equipment Listing Not necessarily for your signature but so you know what you have.
Also post an introduction in the "New Member" section. New Member Section
You can download a free Owner's Manual here--->Owner's Manual
Welcome to the forum.
ATTENTION All Forum Members - Mandatory Requirement!
Please read this and fill in some of your details and make a signature with your Commander details. (year, model trim, engine, 4wd system, etc.) It is nice for us know what your Commander has in it so we can better help you.
To make or modify a Signature click here for instructions - Signature - How to make or modify
NEW MEMBER REQUIRED READING!!! Important New Member information, Forum requirements & Forum rules. | Jeep Commander Forum
To get the list of everything built into your Commander when built at the factory - have your VIN number (case sensitive) and go here Chrysler Build sheet - Equipment Listing Not necessarily for your signature but so you know what you have.
Also post an introduction in the "New Member" section. New Member Section
You can download a free Owner's Manual here--->Owner's Manual
I do have a fastenal near me, I’ll have to check with them. And what slide hammer grips do you have? I just have the standard 5lb slide hammer set from harbor freight.Try Fastenal for the bolt my man an as far as the axle seized up in the carrier, Get some Blaster an spray it up in there an let it soak an keep working it back an forth I had my front end on a work bench it made things much easier an a slide hammer really helps
It was the standard 5 pounder, I just want to emphasize spray blaster down inside that axel an let it soak there's a snap ring at the end of it an it's rusty down in there.
1 - 11 of 11 Posts
Jeep Commander Forum
A forum community dedicated to Jeep Commander owners and enthusiasts. Come join the discussion about lift kits, modifications, reviews, purchasing, troubleshooting, maintenance, and more!
Full Forum Listing
Recommended Communities
