[Dads Jeep Commander 2007]

Hi, I'm new and i'm Deb. I would appreciate if someone could please tell me where I can find
a wiring schematic for the power windows on a 2007 Jeep Commander.


Thanks you in advance.

Have a great day!
Deb

 

[jeep5253]

@Dads Jeep Commander 2007 Welcome to the forum! Please make an introduction post in the New Member Section when you get a chance. Here are the schematics for the windows:

 

[Big Blue]

Hi, I'm new and i'm Deb. I would appreciate if someone could please tell me where I can find
a wiring schematic for the power windows on a 2007 Jeep Commander.


Thanks you in advance.

Have a great day!
Deb

@Dads Jeep Commander 2007;

Hi Deb, Welcom to the forum; Please kindly complete your user profile as directed below;

NEW MEMBER REQUIRED READING!!! Important New Member...

NEW MEMBER REQUIRED READING!!! Important New Member information, Forum requirements & Forum rules. Hello new members. Please allow me to welcome you to jeepcommander.com; We want you to enjoy your time here, share your experiences and hopefully learn more about your Jeep Commander by reading...

www.jeepcommander.com

As for your wiring diagram, the 8th post down in the thread below, has the wiring schematics for the Power Windows;

All Windows don't work

All 4 Windows stopped working from all switches, I replaced the fuse which looked fine, and still no windows. Is there a relay somewhere that can be checked/replaced? This is an '07, no issues with any other electronics.

www.jeepcommander.com

Hope this helps and welcome aboard.

 

[jeep5253]

@Dads Jeep Commander 2007;
As for your wiring diagram, the 8th post down in the thread below, has the wiring schematics for the Power Windows;

All Windows don't work

All 4 Windows stopped working from all switches, I replaced the fuse which looked fine, and still no windows. Is there a relay somewhere that can be checked/replaced? This is an '07, no issues with any other electronics.

www.jeepcommander.com

Hope this helps and welcome aboard.

@Big Blue Those are the same diagrams I posted above.

.

 

[Big Blue]

@Big Blue Those are the same diagrams I posted above.

.

I think we posted them at about the same time, LOL.

Sorry about that.

 

[MGQUARB81]

Thanks so much for the info. I was having the same problems and more on a 07' 3.7L. looked inside the rubber boot and had seven wires broken. I would have never thought to look there.

 

[patf111]

may check for broken wires. Seems to be fairly common in the "boot" at the door hinge. not easy to get to. I changed switches, control boxes, and finally pulled the harness out and found three broken wires. solder and heat shrink and have been good for a while now!