Jeep Commander Forum banner

Need to find a wire....

2K views 1 reply 2 participants last post by  cico7 
#1 ·
on the wriring kit for the westin aux lights lights there is a yellow wire that powers the switch. the switch itself has an LED light in it. Running out of time last night and didnt have time to hunt down a wire only powered when the ignition is on so i just ran it straight to the battery. as a result the switch stays illuminated even when the ignition is off. the schematics say to splice into your parking lights, but i dont want to have to turn the parking lights on in order to use the lights. any suggestions as what else could be used and is easily accessible in the engine compartment, and its apprx location/color. thanks for ur help!!
2008 3.7
QT1
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top