Jeep Commander Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I just installed a new Alpine receiver (CDA-105) into my 2006 Commander with Sirius satellite (via the Alpine KCA-SC100) but now the head unit won't turn off unless I press power on it. When I first installed the radio everything worked fine....it stayed on until I opened the door just like the factory stereo which was the base model (not the boston acoustics). After installing the satellite receiver the system won't turn off at all unless I press the power button on the HU. Key in or out, door opened, etc...makes no difference.

I ran the power from the left cigarette lighter to the alpine sat. interface.

For the connection to the radio I used the Axxess harness XSVI-6502.

Any help or ideas would be appreciated!
 

·
Registered
Joined
·
224 Posts
run the power to the same location as you did with the HU. The sat reciever is constantly staying on keeping the alpine headunit on via the ai-net cable.

That would be my best guesse without seeing it in person.

Jeff
 

·
Registered
Joined
·
2 Posts
Discussion Starter #3
Thanks...I'll give that a shot. One thing I should have mentioned is the sound does go out but the HU still has the text of the last song being played over Satellite.

I'll post back the results of the suggestion.
 
1 - 3 of 3 Posts
Top