Jeep Commander Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
Hello , Glad to find this forum. We have gone from Liberty's to a new to us 08' commander sport. It has a couple things we need to sort out, but it will be a college vehicle for my son. It seems to be a nice upgrade from his Liberty. Hopefully we don't ask too many questions!
 

·
Super Moderator
Joined
·
14,914 Posts
Welcome to the forum, @rigid!

.
 

·
Registered
Joined
·
4 Posts
Discussion Starter #3
The commander we bought is supposed to be a motor swap.It was originally a 3.7 with an EGR and a connector still in the harness, but the engine in it now is supposed to be out of a 06"liberty with no EGR provisions. It runs down the highway fine but sometimes idle is a bit off. A local shop said we need to put an egr on to get the CEL to go out. I am a bit confused because the back of the intake is different than both 06" liberty's that we have. The one in the commander has the egr Tube cut and welded closed. It just plugs the hole in the back of the plenum.
Also the pcv port on the drivers side back of the engine had no hoses on it. The same style port on the back of the passenger side is capped. Any ideas on where a can find photos of what should be correct ?

Thank you
 

·
Super Moderator
Joined
·
5,759 Posts
Hello , Glad to find this forum. We have gone from Liberty's to a new to us 08' commander sport. It has a couple things we need to sort out, but it will be a college vehicle for my son. It seems to be a nice upgrade from his Liberty. Hopefully we don't ask too many questions!
Welcome to the forum @rigid;

Post some pics of your Commander when you can; Here are some links if you want to order any other parts for repairs or upgrades to your XK;

Chrysler/Jeep Factory Parts: https://www.factorychryslerparts.com/

North American Parts: https://northamericanparts.rpmware.com/store/account/login.aspx

JeepinByAl: JBAoffroad.com

JustforJeeps.com - https://www.justforjeeps.com/

Rough County lift kits - Suspension Lift Kits, Body Lifts, Leveling Kit, 4x4, Jeep, Chevy, Dodge, Ford, Off-road Truck | Rough Country Suspension Systems®

AFE: Advanced FLOW Engineering | Engineered Adrenaline

CARiD.com - https://www.carid.com/?gclid=CjwKEAjwiYG9BRCkgK-G45S323oSJABnykKAhh8eDfktvKOcXIbZZtyM9MiasWVk-Mba45s2yxNrrxoCEBbw_wcB

Bilstein shocks & struts - Home

WAM Custom Bumpers - https://wambumpers.com/

JeepSteel Custom Bumpers - https://www.jeepsteel.com/

4WheelParts.com - Truck Parts & Jeep Parts - Lift Kits, Winches, Tonneau Covers, Tires, Wheels, Bumpers, Performance ? 4 Wheel Parts

RockAuto - https://www.rockauto.com/en/catalog/jeep,2006?a=Referer+www.google.com+URL+%2Fen%2Fcatalog%2Fjeep

Also, please read the new member required reading below if you haven't done so already; lots of good information in here;

REQUIRED READING!!! New Member Introduction post & other important new member info.

Thanks and again, welcome aboard.
 

·
Registered
Joined
·
4 Posts
Discussion Starter #5
Thank you for the links. I am sure some of them will be useful after we get it on the road. Got a few more things cleaned up and the proper coolant in last night. Still trying to find a good photo of the engine bay area so we can get emission hoses ran correctly. Specifically the back of the intake plenum area
Thank you
 

·
Registered
Joined
·
4 Posts
Discussion Starter #6
I am finding a lot of part numbers and diagrams for 4.7 stuff. Any ideas on where to find 3.7 ? I believe there is a hose from the back driver side pcv valve that goes to the back of the plenum and one that goes from the air filter housing to the passenger side of the the back of the engine. I have a photo of our stuff but apparently I can not post it yet.
Thank you
 

·
Super Moderator
Joined
·
5,759 Posts
I am finding a lot of part numbers and diagrams for 4.7 stuff. Any ideas on where to find 3.7 ? I believe there is a hose from the back driver side pcv valve that goes to the back of the plenum and one that goes from the air filter housing to the passenger side of the the back of the engine. I have a photo of our stuff but apparently I can not post it yet.
Thank you
Once you hit 5 posts, you should be able to post some pics.
 
1 - 7 of 7 Posts
Top