Jeep Commander Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
Hi guys/gals, hoping you can point me in the right direction. I installed an OME medium duty lift kit on my 06 Commander this past weekend. Everything installed smoothly and it's a great, quality lift. Today I sent it off to get my new Nitto Terra Grappler tires (265/70/17) installed with Spidertrax spacers.

Before I bought the lift, I did a ton of research on here as well as other sites about the lift and tire combo. Well after the tires and spacers are installed, they are rubbing pretty bad in the front. Specifically the rear outside edge of the front tires rub on the inner fender.

So my question is aside from changing tire sizes, what are my options? Additional strut spacer? Will this require new control arms?
Any info is greatly appreciated. Sorry I don't have pics yet.
 

·
Registered
Joined
·
1,585 Posts

·
Registered
Joined
·
147 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #5
Thanks guys. Without having it here yet (still at the tire place) to visualize, does the pinch weld mod affect the tires rubbing on the inner fender? Do you have to mode the inner fender at all? Yes, it's the 1.5" spacers.
 
1 - 7 of 7 Posts
Top