Jeep Commander Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
954 Posts
Discussion Starter #1
Has anybody replaced their power liftgate motor? Mine isn't working as it should and I'm considering replacing it. I found the motor, new, for only about $165 plus shipping so I'm wondering if- a) Is it easy to replace? b) Does it need to be programmed/flashed by the dealer after installation?

My liftgate isn't opening with the push of the button on the remote or the overhead console. When I push either one it unlatches but it doesn't lift, then it latches/locks again. It's almost as if it doesn't have enough power to lift it so it just gives up and latches.
 

·
Registered
Joined
·
954 Posts
Discussion Starter #3

·
Registered
Joined
·
954 Posts
Discussion Starter #4
So I looked through the service manual and unfortunately didn't see anything on replacing the liftgate motor. I guess I'll have take a peek on a weekend and see what it looks like.

Thanks for the link on the Service Manual though. That'll eventually come in handy.
 
1 - 4 of 4 Posts
Top