Jeep Commander Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
126 Posts
Discussion Starter #1
Hello all,
Does anyone have input on how to take the radio out of my 07'?
It has the 6 disc Boston Accoustics system. I want to install a Peripheral iPhone system. I'm just not sure on how to start taking the dash apart.
Thanks in advance....
 

·
Banned
Joined
·
1,406 Posts
take the bolts out of the dash. you only need to take certain ones but I can never remember.
Take the 4 screws out

Radio out.
Cico7 is correct, in that there are 4 phillips screws that hold the radio in. However, you first must remove the dash face plate. There are 16 exposed allen head screws, of which 5 are for looks only. You can take all 16 out, rotate the dash face plate toward you from the top, and lift it over the steering wheel. You will then see the 4 black screws.:eek:rangehat:
 

·
Registered
Joined
·
126 Posts
Discussion Starter #4
Thanks alot. I'm going to go out and give it a try now.
 

·
Registered
Joined
·
378 Posts
You'll want to look for the diagram, you don't want to remove the non-removable ones because they don't go back in very easily, they are basically glued in.
 

·
Super Moderator
Joined
·
15,103 Posts

·
Registered
Joined
·
126 Posts
Discussion Starter #8
I did find a diagram of which socket head cap screws to remove.
Thanks for the input.
 

·
Registered
Joined
·
126 Posts
Discussion Starter #9
I got my iPhone all hooked up to my Jeep today. Thanks for the link Jeep 5253, it helped me take the console apart to run the wire through there. It works well, now I have the ability to play all of my downloaded music in my Jeep.
 
1 - 9 of 9 Posts
Top