Jeep Commander Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
120 Posts
Discussion Starter #1 (Edited)
so as everyone knows the front u joint isn't replaceable since it is staked in.
Well i refuse to take no for an answer. So I cut the old u joint out then pressed the caps inward, this way i didn't have any interference from the stakes. then i smoothed out the stakes, pressed in a 1310 spicer u joint and put 4 tack welds on each cap. took it for a drive at various speeds and there is no noticeable vibration. the knocking on the floor under load is gone as well.

 
1 - 2 of 2 Posts
Top