Jeep Commander Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Wood Bumper Automotive exterior Gas Auto part
i just got a 2007 jeep commander and would like to know if these sides steps would fit, is from a 2015 jeep 4 door not sure which model, thank you in advance
 

·
Super Moderator
2006 Commander Limited, 5.7 Hemi QD2
Joined
·
1,881 Posts
Measure them against the Commander and you might fabricate a mount. Could be easy or very complicated. No parts between models can be a guaranteed fit

Welcome to the forum. Please read this and fill in some of your details and make a signature with your Commander details. (year, model trim, engine, 4wd system, etc.) It is nice for us know what your Commander has in it so we can better help you.

NEW MEMBER REQUIRED READING!!! Important New Member information, Forum requirements & Forum rules. | Jeep Commander Forum

To make a Signature click here - Signature - How to make or modify

To get the list of everything built into your Commander when built at the factory - have your VIN number (case sensitive) and go here Chrysler Build sheet - Equipment Listing Not necessarily for your signature but so you know what you have.

Also post an introduction in the "New Member" section. New Member Section

You can download a free Owner's Manual here--->Owner's Manual
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
Thank you for the information, I will see if I can do that, and I upgraded the info on the commander
 

·
Administrator
Joined
·
8,162 Posts
Thank you for the information, I will see if I can do that, and I upgraded the info on the commander
@Septu ;

I added your profile signature based on the user profile questions that you answered;

That signature will now appear at the bottom of all of your posts;

I made an educated guess that you have QD-II 4WD; that was the only field that you didn't fill out.

If it's wrong, let me know & I can change it for you.

Welcome aboard.
 

·
Registered
Joined
·
63 Posts
I have the tubular Mopar OEM sidesteps and they have two two brackets. They may fit if you remove the middle one. Be interested to know.
 
  • Like
Reactions: Septu

·
Registered
Joined
·
3 Posts
Discussion Starter · #6 ·
@Septu ;

I added your profile signature based on the user profile questions that you answered;

That signature will now appear at the bottom of all of your posts;

I made an educated guess that you have QD-II 4WD; that was the only field that you didn't fill out.

If it's wrong, let me know & I can change it for you.

Welcome aboard.
Thank you I did not fill it out as I was not sure but thank you
 
1 - 6 of 6 Posts
Top