Jeep Commander Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
I have a 2006 Commander 5 disc CD changer stock system. I don't want to change the head unit, but just add and amp and sub. Is this possible? And if so what connections or extra stuff do I have to buy to work this.
 

·
Registered
Joined
·
343 Posts

·
Registered
Joined
·
204 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #4
Thanks for your replies, now on the line out converter I see where the 2 rca hookups are but on the other end are multiple wires. Do I have to splice into the head unit for those or what?
 

·
Registered
Joined
·
343 Posts
You should only need to hook up 2 of those wires, I used my driver door speaker and then run the rca's to the amp.
 

·
Registered
Joined
·
12 Posts
You should only need to hook up 2 of those wires, I used my driver door speaker and then run the rca's to the amp.
When you go to install your line-out converter the more wires that you use the better. Using only one set of wires will give you a limited sound because the sub will only operate off the electrical signals firing from that single speaker. At the very least i would connect two parallel sets of wires to provide a better quality.
 
1 - 6 of 6 Posts
Top