OK...saw a video on Youtube where it was referenced that 200ml puts it 10mm above your level......any objections!!!
Transmission fluid filling increments.....
Post Transmission fluid flush and fill:
When checking my NAG1 Transmission fluid level using Torque App for temperature and Millers tool for quantity, the Level presented is 55mm at 170 degrees Fahrenheit. The level should be at around 65mm as per the Service Guide. My question is as follows: How many Ounces of fluid is needed to bring up the Level 10mm (ie from 55mm to 65mm)??
Thanks in advance.
When checking my NAG1 Transmission fluid level using Torque App for temperature and Millers tool for quantity, the Level presented is 55mm at 170 degrees Fahrenheit. The level should be at around 65mm as per the Service Guide. My question is as follows: How many Ounces of fluid is needed to bring up the Level 10mm (ie from 55mm to 65mm)??
Thanks in advance.
1 - 3 of 4 Posts
32:10 MARK.....
1 - 3 of 4 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Jeep Commander Forum
A forum community dedicated to Jeep Commander owners and enthusiasts. Come join the discussion about lift kits, modifications, reviews, purchasing, troubleshooting, maintenance, and more!
Full Forum Listing
Recommended Communities
