Jeep Commander Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
Hello, I think this is my first post. We bought the truck in November 2005. We've had only one other minor issue which was the 2nd row seat would not fold down.

The uconnect stopped working yesterday. When you push the uconnect button nothing happens. Has anyone else experienced this problem? Any ideas what would cause it to stop working?
 

·
Registered
Joined
·
2,473 Posts
Nothing happens at all or does it beep and then when you try to do something it exits and goes back to radio? The latter would mean it couldn't find the device and might need to be reinitialized.

Also try pressing and holding (3-5 seconds) the left middle button on the back of the steering wheel. Does Uconnect work then?
 

·
Registered
Joined
·
42 Posts
Try opening the hood and removing the IOD fuse in the Power Distribution center. Its a black fuse holder with 2 fuses in it. Leave it out for 30 seconds.
Reinstall it and see if that works. If it doesn't work. I believe there is a TSB for Uconnect System failing to initialize. This is a Reprogram of the telematics
module.
 

·
Registered
Joined
·
6 Posts
Discussion Starter #4
nothing happens when you push unconnect, no beep, absolutely nothing. my wife called the dealership. the service manager told her that they had never worked on uconnect before :confused: . btw, this same thing they told her about the seat when it would not fold down. the sm told her to call uconnect. my wife performed the hard boot procedure with the uconnect operator a few times but it still does not work. shes taking the truck back to the dealership today. i'll post their findings later.

i forgot to subscribe to my own thread :eek: , sorry.
 

·
Registered
Joined
·
6 Posts
Discussion Starter #5
neongts said:
Try opening the hood and removing the IOD fuse in the Power Distribution center. Its a black fuse holder with 2 fuses in it. Leave it out for 30 seconds.
Reinstall it and see if that works. If it doesn't work. I believe there is a TSB for Uconnect System failing to initialize. This is a Reprogram of the telematics
module.
so it could be a fuse? well its going to the dealership and i hope they look for it.
 

·
Registered
Joined
·
6 Posts
Discussion Starter #6
well the unconnect is now working again. the repair ticket states that
"per tsb #08-014-06 reset & flash u/connect hands free module".
thanks for your inputs.
 
1 - 6 of 6 Posts
Top