Jeep Commander Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
3,037 Posts
You need to read the codes for the BAS/ESC/ABS/TCS. I think they are all stored in the ABS module. Unfortunately, ABS and related codes are NOT part of OBDII and thus the manufacturers make them proprietary, only the Dealer or perhaps a few Shops will have the very expensive tool that reads the proprietary codes.

I had the exact same lights, plus airbag lights, after I pulled out my whole dash to replace the evaporator. I had codes for the Steering Wheel Angle Sensor and Driver's Airbag. I trouble shoot down to a blown fuse for the steering column, once I replaced the fuse and everything went back to normal.

So its worth going through your fuses and making sure one is NOT blown before taking it to a someone that can read the codes.
 

·
Super Moderator
Joined
·
15,103 Posts
1 - 4 of 4 Posts
Top