[Big Blue]

Hello,

I just pulled up my Build Sheet from: How to Get Your Factory Jeep Build Sheet - Jeepsies
It says that my 2007 Commander Limited has Quadra-Trac II Full-Time,Active 4WD. :crying:
I thought when its not manually put into 4 wheel drive its in 2 wheel drive. Is this not the case or am I reading this wrong?

@BLEE8282 ;

4 x 4 Commanders - regardless of which 4WD system you have, are in 4-HI all the time - unless you manually drop down into 4-LOW, they are not capable of switching from 4WD to 2WD.

Quadra-Trac II and Quadra-Drive II both are equipped with the NV245 two-speed transfer case which gives you the capability to shift down into 4-LOW using the silver T-Handle jeep5253 was talking about - which you can see in the photo below circled in blue;

 

[Big Blue]

Thank you guys very much!!!!!

No problem, happy to help.

 

[Big Blue]

Do not use that lever unless you are on a slippery surface and going less than 20mph! Using it on dry pavement at regular driving speeds can damage the system.

Ideally, you want to be stopped - and in neutral, when switching into 4-LOW.

Being on a slippery surface is not as important as what I just mentioned - but it is recommended.

You can switch into 4-LOW on a hard surface without causing any damage to your 4WD system, as long as you are gentle & deliberate when you accelerate.

 

[Big Blue]

Mine will not go into 4L unless you are stopped. If you can move yours rolling, it's broke.

I've never tried.

I've always been stopped when shifting into 4-LOW.